Alan Chenkin, Lifelong Carpenter/Cabinetmaker, owned an AWI certified shop for 10 years.
This issue with IKEA products and most inexpensive RTA (Ready To Assemble) cabinets almost universal. Screws do not hold well in particle board, and cabinets can get loose, or come apart. My solution is simple and can be done by almost any person with a little knowledge and desire to fix their cabinets.
Here is one of my solutions, which is often the quickest and most practical (IMHO), and can solve the reassembly problem without waiting for glue to dry. In many cases, a squirt of Titebond glue and a toothpick broken off in the screw hole will make the screw form new threads in the wood when you put it back in.
This will keep an Ikea cabinet box together. I usually use 2 or three on each corner. One caveat – use these screws instead of any that come with the bracket:
Most of the boards are about 5/8″ thick, so 1/2″ screws don’t break out the other side.
You can get these parts at any hardware or big-box store. Most of the time they do the trick.
There are lots of different types of angle brackets. Here is a typical flange type (it’s wider):
Here is a typical application:
Angle brackets can be used on any kind of casework, like drawers, kitchen cabinets, and furniture. Angle brackets come in many sizes, I like the smaller ones for fixing most Ikea products. I like the ones that have 2 screws on each side, because more screws equal more holding power. They are not overly large, and are easy to install with a power screw gun, without pre-drilling.
Thanks for reading and feel free to share this!
All rights reserved by Alan Chenkin & Primrose Path LLC. Remember to give credit to the author and any cited works. If you enjoyed this blog, please feel free to share. Links may be promoted to sponsor sites, but are relevant to the topic.
Also Check out my other sites: