Do you believe Ikea makes quality furniture?

Ikea home store

Ikea carries several lines of furniture. some are inexpensive and designed for people on a budget, and some are very high quality that wear well and have better wood components, hinges, levelling feet, etc.

Almost all IKEA furniture is based on 32mm “RTA” (Ready To Assemble) construction methods, and requires some attention to detail when assembling.

True32 Flow Manufacturing Kindle Edition

The 32mm system, using materials and hardware (designed for RTA cabinetry) enable IKEA to ship cabinets flat in boxes, so that more product can be carried in trucks and containers. it also provides a standard assembly method for almost all IKEA casegoods.

The Truth about IKEA: The Secret Success of the World’s most Popular Furniture Brand — Amazon

Many of the better pieces have panels made of MDF instead of particle board and laminated instead of printed finishes.

How to spot quality furniture at Ikea — Curbed

While you may not consider all IKEA furniture quality, their products are functional and serviceable.

My opinion is that you get a good value for the money, just don’t expect something to hand down to your great grandchildren.

Thanks for the A2A!

Disclaimer: I shop at IKEA, and am an Elite Tasker for Taskrabbit — which is owned by IKEA. I repair and assemble IKEA furniture for Taskrabbit. You can read my blog on woodworking here.

I will say that IKEA is known for it’s food. I love the meatballs.

IKEA’s Real Swedish Food Book

For laughs and giggles you can take to the bank:

Ikea furniture could be worth a fortune in years to come

Note: this was originally published in Quora.

What tools do I need to turn a small log (10in/ 25cm diameter) into 1/4″/6.5mm thick boards?

Bandsaw jig for small logs

If your log is green wood (freshly cut, or “wet”), you will need a bandsaw with a throat larger than 10″ (and capable of dealing with the irregularity in a long 10″ diameter log).

I would recommend (on the modest side) a 14″ – 18″ bandsaw like this one by Laguna Tools:

Laguna 18″ bandsaw

Then you would need a sled, or carriage to transport the log through the bandsaw.

This is a homemade log cutting jig for short logs: Super Simple Band Saw Log Sled, from Instructables.

Note that it uses a fence and fixed clamp to make even, straight cuts. If your log is longer, you will need to make a support or rails so it will slide evenly through the saw.

https://amzn.to/2ECgytEIf your logs are larger then 10″ and heavy, your best solution is to purchase a small sawmill.  This book is available on Amazon, and worth reading, so that you understand the principles and capabilities of a portable saw mill.

If the log is green, you have to allow for drying and shrinkage, so you may cut the pieces 1/2′ thick and then use a thickness planer to get it to the final 1/4″ thickness, after allowing the wood to dry to dry. (8–10% moisture content before planing). This is some good information on how to dry wood; Cutting And Drying Logs Into Boards – Woodworkers guild of America.

This is a typical wood thickness planer:

Thickness Planers are available from big box stores, Amazon, and eBay.

After the wood is sized to thickness, you will need a jointer and a table saw to clean up a long edge and square the board.

At this point your 1/4″ S4S (surfaced 4 sides) boards are ready for fabrication.

Some caveats: These are powerful machines, and caution must be exercised with each machining operation. Use protective gear like safety glasses, ear protection, dust protection, and gloves. Make sure you have all the machines setup and working correctly, and make test passes before machining all the wood, so the slabs will be uniform and true. (parallel sides).

Depending on your specific application, you may need a larger bandsaw, a tablesaw, a jointer, and more – especially if you make the jigs and supporting tables yourself.

Thank you for reading, and Have fun making your own boards from logs!

Disclaimer: I am a trained woodworker and have my own blog, The Chenkin Workshop

What type of tape won’t rip the paint off walls? Is there such a thing?

When you are painting or just hanging a sign, you don’t want the tape to rip the paint off your wall.  It’s unsightly and sometimes difficult to repair.  Avoid Duct tape, flex tape, most scotch tapes, and packing tapes.

Masking tape is not the best. It gets old, and the sticky glue can rip paint off a surface too easily, especially if you press it hard and it bonds to the paint.  This doesn’t mean it won’t work, just that it is not “the best”.  You have to use your judgement, and decide what option you are going to go with.

My best experience is with Blue Painters tape and Frog tape (images and links from Amazon:

ProTapes Pro Scenic 714 Crepe Paper 14 Day Easy Release Painters Masking Tape, 60 yds Length x 1″ Width, Blue (Pack of 1): Amazon.com: Industrial & Scientific

And their “Delicate Version”: Shurtape Technologies Frogtape 217143 Multi-Use Delicate Surface Paint Block Tape, 36mm x 55m, 1-1/2-Inch x 60-Yard – Painters Masking Tape – Amazon.com

There are lots of brands that make Painters tape – 3M, Scotch, etc., and most all will work. Try to use fresh tape whenever possible, and don’t leave it on more than a few days at most.  Some tapes advertise that they can be left on for 30 days.

If you need to put up a hook that can come down without marring the wall, you can get these:

Command Hooks, available on Amazon, eBay, or at your local big box or hardware store.  I use them for picture hanging, and keep an organizer box full of them in my van.  Small ones don’t carry a lot of weight, so pay attention to  the weight of what you are hanging.

Here are more tips:

Tips for How to Use Painters Tape – Family Handyman

How-to Use Painter’s Tape for Interior Painting – Behr Paint

Best of luck with all your painting projects!

I hope you found my point of view enlightening and informative.  Consider sharing it and take a peek at my other works:

All rights reserved by Alan Chenkin & Primrose Path LLC.  Remember to give credit to the author and any cited works. Some links are promoted so the author can maintain his Starbucks coffee habit. If you enjoyed this blog, please feel free to share .This Blog was Human-generated by the author, and not produced by a Russian blog Engine.
The Last Word

Is it ok to pressure wash cedar siding?

If you have severely stained Cedar siding, you can power wash it with a wide nozzle and low pressure. Cedar siding is durable but can be damaged easily by excess pressure, especially when it is aged or very dried out.  You should only use a wide nozzle, because the narrow stream of a straight nozzle is capable of drilling a hole in the soft cedar.

Damage to siding from narrow stream power washer tip

Let me expand on this:

First, make sure the siding is fastened well to the house.  Even at low pressure, you can break loose cedar shingles.  If you have to secure any loose shingles – ONLY USE SIDING NAILS! (other nails may rust or corrode and streak the siding).  If you don’t have – or want –  a power washer, You can even use garden hose with a pressure sprayer head like this:

Crusar Brass Water Jet Power Washer High Pressure Hose Nozzle Pressure Sprayer for Car Washing Vehicle Washing Pet Washing Gardening Outdoor Housecleaning Window Cleaning – From Amazon, it uses 60 PSI home water pressure, not 1800 psi power washer pressure.  I have one and use it for light duty work.

Cedar siding, before and after power washing.

Second, using a good cleaner BEFORE power washing to remove and brighten the siding will make the job easier with less power washing.

Rust-Oleum 16003 3-Pound Jar Wolman Deckbrite Wood Cleaner and Coating Prep – (From Amazon) is a typical deck wash.  Avoid harsher bleaches.  Power washing after you put this on will make your siding look new.  You can put it on with a soft dip brush and extension pole (to make sure you get it into the grooves and dirty spots, or use a pump type Garden Sprayer.  Wood cleaners remove the oxidation and mold from cedar siding prior to power washing.  
After the Siding is clean, consider sealing it or staining it to slow down the aging process and prevent the cedar from drying out.  Age and cleaning will dry the cedar, removing it’s adhesion a d resistance to wear and aging.  It will also keep the siding clean and attractive longer.

Cedar siding is one of the best natural siding materials for your home.  It is attractive and resistant to pests and weather.  Keeping it maintained is a very smart investment for your home!

I hope you found my point of view enlightening and informative.  Consider sharing it and take a peek at my other works:

All rights reserved by Alan Chenkin & Primrose Path LLC.  Remember to give credit to the author and any cited works. Some links are promoted so the author can maintain his Starbucks coffee habit. If you enjoyed this blog, please feel free to share .This Blog was Human-generated by the author, and not produced by a Russian blog Engine.
The Last Word

 

Supporting Cellos at Foxes Music

Today we have a unique showcase for displaying Cellos custom built by Stefan Dromlewicz, Woodworking contractor from Waldorf, Maryland, for Foxes Music in Falls Church, Virginia.

The piece was custom designed for the owner, and made from White Oak Plywood panels and solids, hand finished in a water based gloss polyurethane.

The cabinet features steel angle supports, bump rails, and assembly with finish screws for easy modification.  It can hold 13 Cellos.

David with the fully populated Cello rack.
David with the fully populated Cello rack.
David and Stefan with the fully populated Cello rack.
David going to get another Cello…. And another Cello…
View from the back of Foxes Music Co.
SEE? I told you the Cellos would fit….
Finished display rack, spent woodworker!
I built this! Look! (doing happy dance)
A lot of work went into this. (reflective moment).
David and Stefan with completed display!

 

The instrument slots feature padding to protect the neck of the cello, as well as the body, and turn the instrument  approximately 30 degrees for added visibility.

The Cello display is a complement to the Violin display (not pictured).

Congratulations to Stefan and Foxes Music for this wonderful display!

 

I hope you found my point of view enlightening and informative.  Consider sharing it and take a peek at my other works:

All rights reserved by Alan Chenkin & Primrose Path LLC.  Remember to give credit to the author and any cited works. Some links are promoted so the author can maintain his Starbucks coffee habit. If you enjoyed this blog, please feel free to share .This Blog was Human-generated by the author, and not produced by a Russian blog Engine.
The Last Word
Nerf display case – for the Zombie Apocalypse!

Display Cases You Can Build (Popular Woodworking)

Display Cases You Can Build (Popular Woodworking) – from Amazon Books.

 

 

How do I winterize my exterior hose bib? (translation: outdoor water spigots)

The easiest way is with a foam cover that holds onto the spigot with a cord.

Click Here: hose bib insulating covers from Amazon

This illustrates a typical cover.  Order them NOW, before the winter – Local stores will run out of these, and they are so much easier to put on than wrapping the spigot with insulation, towels, etc.

 

2 Pcs of Faucet Covers Outdoor Faucet Socks for Winter, Freeze Fade and Split Protection, Camouflage And Black
Insulating Faucet Socks, to keep your hose faucet from freezing. From Amazon.

If it is unusually cold, old timers would leave a small drip of water running, since moving water does not freeze.  I would only do this in an extreme situation.

 

If you don’t cover the spigot, and it does freeze, you will have to have it repaired or replaced.  this will cost a lot more than a cover.  It is also a good idea to drain your hoses and bring them inside, or in a shed or garage, where they are shielded from the elements.

 

The Last Word:  

 

 

I hope you found my point of view enlightening and informative.  Consider sharing it and take a peek at my other works:

All rights reserved by Alan Chenkin & Primrose Path LLC.  Remember to give credit to the author and any cited works. Some links are promoted so the author can maintain his Starbucks coffee habit. If you enjoyed this blog, please feel free to share .This Blog was Human-generated by the author, and not produced by a Russian blog Engine.